Xuzhou Furein Elevator Parts Co.,Ltd!

The function and installation of Guide Shoe

The elevator guide shoe

Guide shoe is a sliding part between elevator guide rail and car, what we call it guide shoe. It can fix the car on the guide rail and make car running up and down. Oil cup upper the guide shoe that can reduce the friction of the shoe line and guide rail. There are four sets of guide shoes installed in each unit, respectively on both sides of the upper beam and under the safety clamp seat at the bottom of the car; and also four sets counter weight guide shoes are mounted on the bottom and top of the beam.


The guide shoes fixed on the car can move up and down along the fixed guide rail installed on the wall of the well way of the building to prevent the car from deviating or swinging in operation.


Guide shoe installation requirements

The installation method of guide shoe is to put it on the installation position of the guide rail of the car frame. After finding the right position, use the bolt fix it on the car guide rail frame. The installation must meet the following requirements:


When the upper and lower guide shoes are installed in the right position, they should be on the same vertical line. No slant or deflection is allowed. Both roller guide shoes and fixed guide shoes same requirement.

Fixed guide shoes are mainly used for FOVF units, the clearance between the two sides should be consistent, and the clearance between the inner lining and the rail top should be within O. 5 ~ 2 mm


本文链接:http://www.fureinescalator.com/content/?794.html
点击次数:  更新时间:2019-11-20 14:39:51  【关闭